Guide to Properly Sizing a Miniature Circuit Breaker (MCB)
When designing or building an electrical installation, selecting the right circuit breaker is a critical step. Proper sizing ensures safety, protects equipment, and optimizes the design process. This post focuses on the essential methods for sizing miniature circuit breakers (MCBs), providing a clear and refreshed explanation.
For other circuit breaker types like MCCBs (Molded Case Circuit Breakers), ACBs (Air Circuit Breakers), or VCBs (Vacuum Circuit Breakers), additional factors and calculations must be considered. These will be covered in future posts.
Why Is Correct MCB Sizing Important?
Choosing the right MCB for your application offers several benefits:
- Safety: Protects electrical systems and personnel from faults and overcurrent conditions.
- Cost-Effectiveness: Prevents overspending on oversized breakers or insufficient protection from undersized ones.
- Equipment Protection: Safeguards equipment from damage due to overcurrent or short circuits.
- Efficient Purchasing: Simplifies the buying process by providing accurate specifications.
- Streamlined Design: Enhances the overall efficiency and speed of the design process.
Three Key Factors for MCB Selection
When selecting an MCB, focus on three main criteria:
- Ampere Rating (In): Determines the maximum current the MCB can handle.
- Short Circuit Breaking Capacity (If): Indicates the MCB’s ability to interrupt short circuit currents safely.
- Application Type: Defines the appropriate MCB type based on usage.
Step-by-Step Calculation for MCB Sizing
Example: Single-Phase Motor Application
- Load: 1 single-phase motor.
- Full Load Current: 20 amperes.
- Power Supply: 240V AC, 50Hz.
1. Ampere Rating (In)
In the market, standard MCB ratings are typically available in increments like 16A, 25A, or 32A. For this application, a 32A MCB would be chosen.
2. Short Circuit Breaking Capacity (If)
From the result, select a short circuit breaking capacity of 1kA, which is a common rating for standard MCBs.
3. Application Type
Different MCB types are designed for various applications. For this example, a Type C MCB is suitable because it is designed for general use and small motor applications.
| MCB Type | Instant Trip (Multiple of In) | Application |
|---|---|---|
| B | 3 – 5 In | Domestic and commercial use. |
| C | 5 – 10 In | General use, small motors. |
| D | 10 – 20 In | High inrush equipment. |
| K | 8 – 12 In | Equipment with frequent short durations. |
| Z | 2 – 3 In | Sensitive semiconductor devices. |
For a single-phase motor, select Type C for optimal performance.
Conclusion
From the calculations, the specifications for the MCB in this example are:
- Rated Ampere: 32A.
- Short Circuit Breaking Capacity: 1kA.
- Type: Type C.
Final Tips for MCB Selection
- Refer to Manufacturer Data: Always consult the technical documentation from MCB manufacturers for precise specifications.
- Follow Standards: Adhere to relevant electrical standards, such as IEC or IEE, for installation and safety guidelines.
- Consult Professionals: If unsure, seek advice from electrical engineers or qualified electricians.
By following these steps, you can confidently select the right MCB for your application, ensuring safety, efficiency, and cost-effectiveness. For more advanced scenarios and other types of circuit breakers, stay tuned for upcoming posts!
Please give an example for selection of MCB(type C or D)for a 3phase induction motor,say 10HP,15Amp- if started using an across the line(DOL)
as well as wye-delta starter.
from your example :-
10 hp;15 ampere
the calculation is :
15 ampere x 0.25 = 3.75 + 15 ampere = 18.75 ampere
So we can choose the MCB ampere rating = 20 ampere
For induction motor with DOL stater,the suitable type is C or D
As the starting current is not the same for DOL and star-delta starters
can we use smaller MCB for star-delta starting?. Is it correct if I say 20A for star-delta and 25A for DOL starting
U can use a smaller MCB but make sure it not below from the full load ampere rating.One more important thing is the TYPES of MCB must suitable with your application.Example MCB type C or D for motor stater.For more safety about overload protection,we still have the overload relay :D
For frequent start/stop or DOL starting, OL relay won’t protect. MCB will trip for inrush current.So we used MCB type C rated 2xFLA for DOL and 1.5xFLA for star delta starting. Another important aspect is the rating and type of MCB should match the duty of motor -AC1,2,3 etc. For frequent start/stop like pressure switch operated water boosting pumps should be use type C duty AC3 or type D AC1?. Therefore the formula 1.25xFLA is for which duty class and will the tripping and contact wear problem will be solved for some class of duty by using class D MCB?. Please elaborate.Manufacturer’s literature will be a useful guide.
stl
Hi guys,
Please advice me. if i have 5 unit 10 Amp MCB type and 1 incoming fuse isolator. what would be the rating of fuse inside isolator..example:total all MCB = 50A?
You can used isolator switch 40 ampere or 62 Ampere..it ok if ampere size is bigger.It spare for future additional of mcb
15 ampere x 0.25 = 3.75 + 15 ampere = 18.75 ampere
Dear sir , in above example to calculate ampere rating why you addaed 15 , plz explain
Dear sid…
first we multiply the full load ampere value with 25%.After that we add back with total ampere value to get total ampere for MCB rating.
Hi guys
Please someone can confirm if I can use 3 phases breaker on a 1 phase load. It may sounds weird, but I do have this spare and dont wont to buy one new 1 phase breaker.
Believe is ok, but nor sure. Thanks
can you update me about this post: The calculation for sizing the miniature circuit breaker.For other circuit breaker likes MCCB,ACB,VCB,OCB and etc,it have a additional factor and calculation that we must consider.
dear sir,
can you plz tell me why you are multiplying total load current (Iz) with 125%?
i have been trying this but i was multiplying the load current with 120% and getting the right ans for the ratings which are given in watts but couldn’t got the ans for the ratings which are given in hp.
can you plz solve this for me??
mcb rating for 0.5 hp.
my sol. is—
total load current will be Iz = 0.5*746/220 = 1.69A
In = 1.69(120\100) = 2.03A
according to this we can use mcb of rating 2.5A.
but the ans is 6A.
can you solve this??
hello sir,
I am having problem with 40hp 3phase motor 63amps MCB trips
after running for an hour,when i bypass the MCB and run for an hour
it blows off the incoming 100A fuse.checked motor meggar,good more than 20Momhs,checked phase to phase coil winding-good.phase to phase
voltage also good-415v.What could be the reason for the above problem
thanks.pls help.
How do we know R Cable ? or 0.276 is a default value ?
Those fumula are very useful for electrician thanks
why multiply with 0.25 every time with the full load current of the component?
I have 15 amps motor but am using mcb 63 amps this is not suitable how to calculate mcb amps I dnt no guide me
hello,
why we the 0.25 factor..
and i am using the fan motor rating is 3.8 amps can u tell me appropriate MCB
why are used the constant values to rated current and what is the relation between resistance cable and the MCP circuit breaker ….. and your equation i can u used it in all times and for all difference value of rated current ……
ABB more price and less clear compare with Schneider…..
Hi! This is my first visit to your blog! We are a team of volunteers and starting a new initiative in a community in the same
niche. Your blog provided us beneficial information to work
on.
https://www.localunitedservices.com/electrician-san-diego
You have done a wonderful job!
Please check your phase either is completed 3 phase or not.
you need 125 MCCB/Fuse
40 x 746 = 29840 watt
FLA = 29840/611
FLA = 49 Amps
Assume your are using star-delta starter:
49 x 2.5 = 123 Amps
So the nearest MCCB available in market is 125 Amps
your above calculation of the mcb sizing is wrong
how do u arrive at 25@32ampere,the working is confusing.
Hi sir, In our machine we are using 4 servo motor and 2 induction motor, servo motor ratings are total 2300w, induction motor loads are 2000w, how i can select the main MCB for this machine.
Hi,
Please calculate total full load ampere for your system ( 2300W + 2000w).Use this formula to get FLA –> P = I x V x 1.732.
After you get the FLA than you can sizing the MCB.
The incoming neutral of two sources of supply should not be mixed up ? Why?
For three phase input and three phase and single phase output , TPN MCB is preffered over FP MCB .Why?
as per the above example,i came understood that in an small non ac house each and every equipment (right from small water pump to geyser or water heater) of different amp rating should have different,different mcb’s rather than traditional 16amp or 20amp single mcb for the whole small house,
Is it right sir,replay me soon.
how many sizes start mcb and and last size
Hi,You can refer Manufacturing Catalong
How we can calculate mccb for 350hp motor
Dear Sir
what is . Selection method for MCCB,
Hi,
Please get the full load ampere for 350hp motor,and used formula to get suitable breaker size
How much rating of circuit breaker for 1500kva?plz answer with formula.
How can i calculate PFI rating?plz answer with formula and example.
mcb current capacity is 125% of rated capacity. that why we r adding 25% of rated
I am starting a fitness centre. I am taking a supply of 40 kW to cater to all my requirement. Supply is 3 phase. What should be the mcb capacity at my distribution box. What type of mcb, how many poles and current capacity. Builder has installed a 63 amp mcb. Should I change it.
Lights 100w fan 50 w + one 5a socket
What is the range of mcb
Please advice me the book reference for the study of cable sizing calculation
Hi,
Please read my last post about cable sizing –> http://www.electricneutron.com/wiring-techniques/electrical-cablewire-sizing/
Hi
Sir i have 6 stright light one have pole having 6 bulb one bulb for 2000watts and i am using each pole one breaker separat separate 32 amps breaker how should be main breaker size
1) If This is VFD what is the breaker size?
2) If this is soft Starter What is the Breaker size?
3) Assume if this is DOL starter what is the breaker size?
4) For selecting of cable we have to use the rated current or breaker selected current.
How to size MCB for DC load
1.If unit power is 300 watts and current is 3.13 why current safety factor is 125% considered whichi s 3.91 amps.
excuse me sir…
Why you chooses resistance cable with 0.276 it depend on table or calculate?
can you saw me plz
Please help:
I will start a project in U.S and my incoming source is 480V/3P/60Hz/100A. What size mccb should i use that is good. How about 690V/3P/50-60Hz/100Amp/?KA?? Need help to size up the KA!!
hello Sir,
I want to use 13A socket 6 nos for onl circuit so what size of breaker can I use? how can I calculate the breaker size?